Tag Archives: LT-PVC Power &Control Cables

How to Purchase Power and Control cables

If you are constructing a new house, complex, apartment and new office or renovating your old house then in this condition you should do any compromise with wiring of electric system. It is very important to use of good quality LT-PVC Power &Control Cables and wiring in a home or buildings. You can create a hassle free environment for your family member and others.

When you are going to buy Power and control cables for your electrical purpose then some of the important things that you should always keep in mind.

Image

  1. Before buying any control and power cable you should check the authority of manufacturer or brand popularity of a product. If product popularity is good then it means this product is better in quality and performance.
  1. You need to check the voltage grade of the cables. Finest cables can easily handle and work in both dry and wet conditions.
  1. Before purchasing any cable it is require checking the length and size of the power cable. According to your home requirement and needs you should purchase these control cables.
  1. We should check the certification and standards of a cable. The standards also define the quality of products. The international standards mark products determine the high quality of cables.

So these are the important things that are always helpful for you want to know about those products then Tirupati Plastomatics is an ISO 9001:2008 and SABS approved power and control cable manufacturer and supplier in India and provides products globally.

Medium Voltage Electric Cables

Medium voltage cable is a power cable is most commonly used in the industries of commercial, industrial and electric. The prices of standard voltage for MV (medium voltage) cable between 5 KV and 35 KV, but this range can vary among manufacturers and standards. MV-90 and MV-105 cable, designed for up to 90°C and 105°C, respectively, are two of the most common call outs. Medium voltage cable is available in a wide range and you must learn its basic and common use before purchasing.

Medium voltage cable is available in single and multi-conductor with unshielded styles and flexible design for installation. Medium voltage cable is often designed with either ethylene-propylene rubber (EPR) or cross-linked polyethylene (XLPE). Some materials jacket commonly used in MV cables is polyvinyl chloride (PVC) and chlorinated polyethylene (CPE). Many popular popular mask shielding copper strips helically applied to the insulation.

Medium voltage cable is provided with two types of insulation, 100% or 133% levels. These levels allow the cable to better manage increased voltage system faults should occur. What is the insulation you choose depends on the time error compensation system level. If the fault clearing time is one minute or less, the cable insulation level of 100% is used. 100% is typically used in the system’s ground where there is only an increase of the minimum voltage. The insulation level of 133% is used when a fault is cleared in less than one hour, and it is commonly used in systems with high resistance grounded or ungrounded systems where voltage levels can rise from phase to phase .

Applications:

Medium voltage cable is generally used as a primary energy source for a variety of applications. If you set up these cables according to NEC standards then we can only use these wet or dry locations. It’s also known for their electrical stability and robust design, the medium voltage cables are in difficult applications such as pulp and paper, petrochemical plants, steel mills, textile mills, water and installations waste water, mining, railways and power plant utilities. MV cable is also approved for use in a pipe, open air, and direct burial underground conduits plateau.