Category Archives: Industry

Which one is better PVC or Corrugated pipe for Interior Drain Tiles

As we know that in many applications corrugated pipes have proved better than other pipes but in many countries people are using PVC pipes in their home and buildings.

Let’s we talk about those pipes and decide that which one is better Corrugated or PVC

  1. Flexibility: Corrugate pipes are flexible and can easily install without any problem. This can also prevent from water backup and also removes the problem of blockage that is mainly created by iron bacteria’s or garbage.
  1. Drainage: Corrugated pipes are punctures in all the ways and opening water could not see in the pipe and easily drain out from the pipe but Pvc not and it  pipe can only collect.
  1. Less chances of Blockage: In corrugated pipes many perforation get exist so only tiny parts of garbage might be enter in the pipe. Perforation is not directly on the surface but covered so it is very difficult to find garbage in water. PVC pipe has a very large opening that is why blockage problem could be crated.

PVC pipes used only water proofing environment. PVC pipes are expensive as well as we have to pay also labors for installation. So these are features of corrugated pipes that define that we should use only corrugated pipes if we want to free from blockage issues and other problems. Gemini pipes is a manufacturer and supplier of Corrugated and high density plastic pipes and provides its product globally.


How to Purchase Power and Control cables

If you are constructing a new house, complex, apartment and new office or renovating your old house then in this condition you should do any compromise with wiring of electric system. It is very important to use of good quality LT-PVC Power &Control Cables and wiring in a home or buildings. You can create a hassle free environment for your family member and others.

When you are going to buy Power and control cables for your electrical purpose then some of the important things that you should always keep in mind.


  1. Before buying any control and power cable you should check the authority of manufacturer or brand popularity of a product. If product popularity is good then it means this product is better in quality and performance.
  1. You need to check the voltage grade of the cables. Finest cables can easily handle and work in both dry and wet conditions.
  1. Before purchasing any cable it is require checking the length and size of the power cable. According to your home requirement and needs you should purchase these control cables.
  1. We should check the certification and standards of a cable. The standards also define the quality of products. The international standards mark products determine the high quality of cables.

So these are the important things that are always helpful for you want to know about those products then Tirupati Plastomatics is an ISO 9001:2008 and SABS approved power and control cable manufacturer and supplier in India and provides products globally.

Control Cables and its Features

Control cables flexible instrumentation cables are mainly used for the purpose of automation and control. Similar to other cables, helps control the transmission of signals that help manage and control the operation of the machines. The control cables are also known as instrumentation cables, multi-core cables, motors, cables and robotic Flex Control.

All those who have already tried a bicycle knows what brakes are and how they work. Control cables operate on the basis of the same concept. As bicycles, modern machinery such as cars and airplanes need control cables to regulate their movement. The construction of the control cables is similar to other cables with bare copper conductor, sheath and armor of galvanized steel. However, some varieties of control cables may not have armor, but they all added their sleeve for extra strength PVC compound. Industrial Control Cables are mainly used in applications where it is necessary for smooth movement. As these cables are subjected to handling the high pressure electromagnetic, they carry multiple cores and braids of tin coated copper.

There are different types of control cables and each are scientifically designed to regulate signals when interconnected. The reactivity of these machines depends on the application, the type of wire, the equipment and how it is connected to the machine. Although there are different types of control cables available on the market, those that are commonly used are CY (flexible shielded cables), YY (unshielded control cables) and SY (Flex shielded) cables. These cables are further divided into the low smoke, halogen free and halogen-free versions.

Medium Voltage Electric Cables

Medium voltage cable is a power cable is most commonly used in the industries of commercial, industrial and electric. The prices of standard voltage for MV (medium voltage) cable between 5 KV and 35 KV, but this range can vary among manufacturers and standards. MV-90 and MV-105 cable, designed for up to 90°C and 105°C, respectively, are two of the most common call outs. Medium voltage cable is available in a wide range and you must learn its basic and common use before purchasing.

Medium voltage cable is available in single and multi-conductor with unshielded styles and flexible design for installation. Medium voltage cable is often designed with either ethylene-propylene rubber (EPR) or cross-linked polyethylene (XLPE). Some materials jacket commonly used in MV cables is polyvinyl chloride (PVC) and chlorinated polyethylene (CPE). Many popular popular mask shielding copper strips helically applied to the insulation.

Medium voltage cable is provided with two types of insulation, 100% or 133% levels. These levels allow the cable to better manage increased voltage system faults should occur. What is the insulation you choose depends on the time error compensation system level. If the fault clearing time is one minute or less, the cable insulation level of 100% is used. 100% is typically used in the system’s ground where there is only an increase of the minimum voltage. The insulation level of 133% is used when a fault is cleared in less than one hour, and it is commonly used in systems with high resistance grounded or ungrounded systems where voltage levels can rise from phase to phase .


Medium voltage cable is generally used as a primary energy source for a variety of applications. If you set up these cables according to NEC standards then we can only use these wet or dry locations. It’s also known for their electrical stability and robust design, the medium voltage cables are in difficult applications such as pulp and paper, petrochemical plants, steel mills, textile mills, water and installations waste water, mining, railways and power plant utilities. MV cable is also approved for use in a pipe, open air, and direct burial underground conduits plateau.

Which Control Cable should use

Control cables are used to transmit communications to and from devices. These are found in many different processes day by day and the application, so that our daily processes work effectively, the enormous automation, industrial processes and much more effective and efficient work.

control cable manufacturer

The control cables are the most popular in industries including automation, telecommunications, military, distribution data transmission, oil and gas petrochemical, energy, electronic distribution, distributors mining and electricity and more.

There are many companies that deal with the control cables provide state of the art advanced technology in the manufacture and export of wire models and expanded capabilities. There are three main control cables are cable CY, and YY Cable SY Cable – each more suitable for different applications, conditions and stress levels.

Control cables for flexible instrumentation cables designed as interconnect cable signal and control equipment, ideal for measuring, controlling and regulating transmissions.

CY cable: CY control cable works most effectively for applications requiring transmission without interference. The multi-core flex wire is tinned copper braided polyethylene terephthalate separator that helps protect the control cable electromagnetic influences and a degree of mechanical stress.

YY Cable:  YY control cables are used in space saving due to their small diameter cable installations and increased flexibility due to layers of twisted conductors short. They are very flexible and work well in situations of light mechanical stress. Situation in light mechanical stress and is suitable for most environments, which means it can be used outdoors as it is applied to the protection safekeeping in both wet and dry conditions.

SY cable: This is the most difficult control cable that is suited for applications that need mechanical protection. Galvanized steel wire braid control cable makes it ideal for those who, after a cable reliable and strong control, they can count on.

Relationship Between Diaphragm Valve and Corrugated Pipe Valve in the Sterile Equipment

In the sterile area, competition between the corrugated pipe valve and the diaphragm was last long. The diaphragm valve is the advantage because it is simple in structure, cheap in price and practice of sterilization. Compared to the valve, the corrugated pipe  valve also has some specifications on the market. Whereas since Univalve company produces corrugated pipe valve Vesta, it fills the void. Now, the article will present the advantages and disadvantages clearly through the comparison between the two valves.

First, the property drain. When the diaphragm valve is used in the horizontal pipe, people must ensure that the installation must be followed by the manufacturer’s instruction. Or, in the process of operation, the ability to drain will have problems and can not fully discharge the fluid through the valve. But different types of these valves have different inclinations to the facility, which cause many problems in terms of equipment sterile processing. Especially for the valve membrane structure T, the problem of emptying property is more evident. Compared to the valve above the valve corrugated pipe has never such a problem. Whatever the structure of the valve is the valve corrugated tube can never get out of the blind spot when it works. Thus, it ensures strictly cut the pipe. And it can be installed in the piping system with sterile equipment under different mounting means.

Secondly, comparing the availability of the apparatus. When the user of the equipment, he must do his best to make use of the material as possible. The corrugated pipe valve will be brought to the general situation. For the diaphragm valve, once it is worn, it must be changed. Regarding knowledge, the running time depends on the production process involved. On the one hand, many factors such as corrosion of the flowing fluid, compensation for driving, the temperature for sterilization, the working pressure will influence the time of service. On the other hand, the deformation of the wall can also choose the time of the valve for use.

Third, sustainability. Most diaphragm valves not be destroyed during the operation. Instead, they are destroyed by mechanical compression. Although the diaphragm valve has different classes, different coatings and PTFE flexible framework covers all valves will still be borne by the middle of the inside. Therefore, it is often necessary to change the valve in the sterile process. But the corrugated pipe valve does not need to be changed often and it can be used for many production processes.